-
Blog Page
How large a leak could you be missing with CPM?
Computational pipeline monitoring (CPM) is legislated on most pipelines in North America. While these systems are crucial in maintaining the integrity of a pipeline, they only operate at roughly 2-3% of throughput, and have a theoretical limit of 1% of throughput due to the error tolerance for meters.
-
Blog Page
Asset management begins with leak detection
A proactive leak detection strategy plays an important role in any asset management program. It allows utilities to obtain the general condition of their mains, since a leak not only represents a real water loss, but can also indicate the potential for pipeline failure.
-
Blog Page
Increased regulation makes rising main management a risk priority
While metallic rising mains have been historically difficult to manage, a risk-based approach increases confidence in the condition of the pipeline.
-
Blog Page
How to exceed standards in your Direct Assessment Program
Despite its high strength, steel has a propensity to dent, buckle, corrode or crack when exposed, all risks to the integrity of a pipeline. In order to identify defects, proactive pipeline inspections are necessary to avoid failures, leaks or ruptures. One way of validating pipeline integrity is the use of Direct Assessment.
-
Blog Page
No silver bullet technology for pipeline condition assessment
For utilities with large-diameter networks, waiting for failures to occur before repairing or replacing highly critical mains is not an option.
-
Blog Page
Manage metallic pipeline networks in a sustainable manner
While PCCP assessment and management have been successfully used by utilities for years, effective assessment solutions for ferrous pipe have only recently been commercialized.
-
Blog Page
Reducing water loss and NRW with smartball platform
Since 2007, utilities all over the world have been using the SmartBall® pipeline inspection platform to save millions of dollars in water loss and to fix leaks before they turn into larger problems.
-
Blog Page
Pipeline management: old pipe is not always bad pipe
Despite their critical importance, for decades many municipal utilities have operated under a “bury and forget” mentality – with little emphasis on long-term management of their aging pipelines – at least until something goes wrong.
-
Blog Page
What makes a pipeline deteriorate to a state of failure?
According to AWWA’s 2016 Benchmarking Survey, the average water and wastewater utility has seven breaks per 100 miles of piping every year. Tip-top systems experience just four breaks in that distance, while those at the bottom have 18.
-
Blog Page
Using the right data to improve pipeline management
With stories of broken mains and aging infrastructure attracting more public attention, pipeline owners face difficult questions about long-term planning for their water and wastewater linear assets. In particular, when and where to focus renewal funding to service these aging networks.